Increase your equipment's versatility and productivity with a
671/753 Series DIG-R-TACH® earth auger attachment.
Engineered to perform with skid steer loaders, small excavators, knuckle
boom cranes and small backhoes, the smaller Series 16 features a two speed
chain/sprocket drive system that allows it to balance smaller flow volumes
to auger diameters. Results are cleaner holes with less loose soil and
debris.
For higher capacity drilling, the Series 24 is designed
for the larger hydraulic systems of backhoes and small excavators.
Installation is simple with a dipper-stick mounting bracket.
Low speed hydraulic motors and chain reduction drives
deliver smooth, efficient torque transfer to the auger drive shaft while a
standard 2 inch hexagon auger drive eliminates connection wear problems.
Models with a 2-9/16 inch round drive connection are also available.
A complete line of earth augers up to 36" diameter is
available with Pengo® type boring heads. For additional drilling depth, full
flighted auger extensions can be added.
General... the worldwide leader in portable hole digging
equipment.
The 471 DIG-R-TACH system can increase the versatility of
compact tractor loader backhoes, mini-excavators and small tractors by
allowing them to become more practical and productive solutions for many
hole digging projects.
The system features a universal mounting bracket that
readily conforms to a wide variety of bucket configurations. Mounted quickly
and easily in a few minutes by just one person, the 471 DIG-R-TACH requires
so special installation tools, bucket drilling or welding of attach
brackets. The specially designed clamping arms grip tightly with positive
locking force.
The highly effective hydraulic motor features a wheel
mount type configuration of greater load capacity than standard motors. The
supplemental bearings are designed to absorb damaging thrust and side loads.
The 471 DIG-R-TACH utilizes the same 4400 Series earth
augers utilized with the popular General 310/330 Series Hole Diggers. These
augers feature time proven, heavy duty construction and Pengo® type boring
head configurations. Augers are available from 2 to 24 inch diameter. When
used with the 471 DIG-R-TACH, augers produce clean, useable, 4 foot deep
holes.
